 |
| Your best source for Gaskets, Durlon®, Durabla®, Parker,
TFE, PTFE, O-Rings, Molding, Gore-Tex®, Perfluoroelastomers, Graphite,
Sponge, Heat Exchangers, Hypalon®, Rubber, Packing, Seals, Teflon®,
J.M. Clipper/Leader®, Rubber, Nitrile, EPDM, Kalrez®, Sealon,
Spiralwounds, Ring Joints, Silicone, Neoprene, Viton®, Flexible Graphite
Sheet, Barge Sealing Supplies, Butterworth Gaskets, Marine Gaskets and Seals,
Ultralon, Waterjet Services and More! |
 |
 |
 |
 |
 |


 |
 |
Sealon Properties |

|

 |
 |
| General Data |
| Physical
Properties |
 |
Tensile Strength (PSI) 1/16" Thickness |
2200 |
 |
Compressibility (% ASTM F36) |
10-16 |
 |
Recovery (ASTM F36 % Minimum) |
35 |
 |
Sealability (Milliliters/hr.) |
.01 |
 |
Elongation (% ASTM D4745) |
250 |
 |
Modulus @ 100% Elongation |
1600 |
 |
Specific Gravity (ASTM D 792) |
2.22 |
 |
Hardness (Shore D) |
61 |
 |
Temperature |
-350°F to 500°F |
 |
 |
 |
 |
(M) Factor 1/8" Thickness 1/16"
Thickness |
2.00 2.75 |
 |
 |
 |
 |
(Y) Factor 1/8" Thickness 1/16"
Thickness |
1800 4000 |
 |
 |
 |
 |
Flammability |
Will Not Burn |
 |
Bacterial Growth |
Will Not Support |
| Sealon Compression
Analysis |
PSI Clamping Force |
Sealon |
25% Glass Filler |
Virgin T.F.E. |
| 5,000 |
.008 inch |
.008 inch |
.008 inch |
| 10,000 |
.010 inch |
.013 inch |
.012 inch |
| 15,000 |
.013 inch |
.019 inch |
.023 inch |
| 20,000 |
.016 inch |
.027 inch |
.040 inch |
| 25,000 |
.023 inch |
.041 inch |
.055 inch |
| 30,000 |
.030 inch |
.058 inch |
.064 inch |
|
 The above figures reflect the
amount of deflection and cold-flow on a comparative basis of the four tested
materials. All materials were nominal 1/8" thick and were tested at room
temperature. Compression figures are in inches.
 Sealon Home | Applications | Properties | Resistance Charts |
|
|
 |
 Ameraflex Also Carries Sealon Sealon is a gasketing material containing inorganic round
beads consistently disbursed throughout a PTFE base. This unique mixture allows
for precision control over cold-flow problems inherent with virgin PTFE. The
exacting mixture of Sealon virtually eliminates the need for
retightening. Sealon is the result of over 30 years of research,
development and testing. This history has brought Sealon to the level of
perfection our industry demands.
RESISTANCE CHARTS See Our
Resistance Charts For The Complete Story of Compatibility and Uses For
Sealon. Teflon® is a registered
trademark of DuPont. Gylon® is a registered trademark of COLTEC
Industries. Gore-Tex® is a registered trademark of W.L. Gore &
Associates, Inc. Sealon Is A Trademark Of Ameraflex Sealing Products Co.,
Inc.
 |



 Ameraflex
Sealing Products Co., Inc. 317 Georgia
Avenue Deer Park,
Texas 77536 1-800-522-7325 (281)476-8500 FAX(281)476-8520 e-mail
 Copyright © by Ameraflex
Sealing Products Co., Inc. All Rights Reserved Another
Website
|
|